3d cover for the pi noir camera

Using the (included) industrial-grade Autodesk Fusion 360 software, I was able to design a part for my Robo C2 printer. It’s a cover and mount for the Raspberry Pi NoIR v2 camera (8MP resolution @ $27). I picked up several cheap suction cups (@ $0.99) from Ace Hardware yesterday and used a digital caliper to carefully measure the distances all around. I’ll sand it a little to make it smooth; the photos below is what it looks like after removing the raft and supports (throw-away extras to make everything print correctly). The jaggies inside the suction cup slot I’ll leave since they’ll grip tightly. I’ll likely also keep some of the jaggies in the fitting between lid and base for the same reason.

I’ll still need to receive the longer cable from Adafruit for this to work so I haven’t snapped down the parts firmly yet. In the meantime, I might create a ribbon clip with a second suction cup (editing the money clip from an earlier post).

If you’d like the STL files for the part now, let me know and I can shoot you the URL for those but I’ll eventually write up a step-by-step tutorial on the full upgrade to adding the video feed capability.

IMG_0116IMG_0117IMG_0118IMG_0119IMG_0120IMG_0121IMG_0122

100posts

Advertisements