dual-spool coolness, etc

Anticipating a dual-extruder upgrade soon for the Robo C2 printer—imagine printing in two colors for the same part—I’ve designed and printed a dual-spool holder for those two filaments. It’s an upgrade for the printer and works much better than the original holder.

SideView-C2andHolder

The original spool holder stuck out of that rectangular hole in the back of the printer, sometimes falling out during the middle of a print job. Aesthetically-pleasing but impractical, I’ve now replaced the original.

DSC_0062

I’ve created step-by-step instructions for creating two versions: one for the full kilogram rolls and one for the half-kilogram variety.

Repository

Stability

Another design challenge with the Robo C2 printer is the way that the print bed is cantilevered from the back of the printer. It’s a bit like a diving board and similarly wobbles at its front-most extremity as you’d expect. This isn’t really optimal for 3D printing because it results in poor quality with taller parts and especially those which are oriented toward the front of the printer.

robo

CantileverStabilityPlate

I’ve therefore designed a cantilevered stability plate to afix to the bottom of the print bed itself which should provide some firmness in this dimension. Eight M3 type aluminum bolts are the only thing needed other than this part.

Repository

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s