Trying to push the envelope in print volume on the Robo C2 printer, I’m finding that the part wants to curl on the bed (since the latter isn’t heated). Hmm…
This is a common occurrence, I understand. It’s due to the uneven temperatures of plastic on the bed versus the new (hot) layers of added plastic. To get a part this big, I actually had to lie to the software and to suggest that the printer has a bigger range than this. This sort of tweaking is commonplace.
Hairspraying the bed is a known gimmick for 3D printing, but as you can see, the painter’s tape is well-stuck to the part. Instead, I’m thinking of 1) printing the raft at the bottom, 2) pausing the print at this point, 3) removing the bed, 4) applying clamps around the edges and finally, 5) resuming the print job.
From my experience in a plastic manufacturing plant, I learned that if something doesn’t work: modify it, build a helper tool or change the process somehow so that it does work. Here, I’m opting to build a set of clamps to assist in the 3D print process and to insert a pause into those instructions (“GCODE”) at the proper moment.
Half the battle, then, is designing and building a number of clamps. To be useful, they should allow their placement at a variety of distances from the edges of the bed. They should hold throughout the job even if things are vibrating and moving around. They should never restrict bed movement. Since the print job goes for perhaps ten hours, they must not fail in any way if I’m not there to watch their performance.
The other half of the battle is to create something which modifies the GCODE instructions to place a pause at the right moment (as soon as the raft has been laid down). My guess is that this will look like an OctoPrint plugin. There probably already are a number of plugins which pause at a particular z, meaning that they will pause the print job when it comes to a particular vertical layer. I was thinking that I might invent a different approach somehow in this space but I’ll see what I can come up with. I like the concept of pause after raft, though, and would imagine that this would be useful enough to others.
This should save a lot of print jobs from curl, I hope. And that should translate into a lot of money saved in filament, as well as time.