My two packages arrived today at the post office so I just hauled in all the loot from this earlier post in which I’ve purchased some new toys.
Raspberry Pi Zero W
The photos from their website don’t really describe how truly small this computer is now. They’ve somehow managed to stack the RAM on top of the microprocessor to save space. As I’ve apparently ordered the wrong video adapter cable, I’ve got a trip over to
Best Buy Frye’s Electronics this evening so that I can sort that one out. I need a female HDMI to DVI, in other words. Otherwise, I’m still pretty stoked. Since there’s only one micro-USB I think I’ll temporarily need a small USB hub while I’m at it.
This arrived as well, all four of the segments but it was lost on me that I’ll need to solder each of them together. Fortunately, I have a soldering iron here somewhere. :looks around: I’m certain of it.
COZIR CO2 Sensor with RH/Temp
And in the other relatively BIG package is the relatively small sensor package. No wonder they charged me $21.88 to ship this to me. Seriously, it weighs about an ounce.
And it looks like I’ll need a 2×5 jumper to attach this over to the Raspi, with a solder-able header for that, too.
Alright, I’m back from Frye’s with a handful of stuff and I’m back in business. The video adapter allows me to see what’s coming out of the Raspberry Pi Zero W and the micro-USB hub allows me to hook up a keyboard and mouse to talk to it locally. A first install with the Raspbian Jessie Lite image resulted in a terminal-only configuration (I must have been in a hurry and didn’t read the differences on their page) so a second install of Raspbian Jessie with Pixel was just what it wanted: a full desktop experience. If I get some time this weekend I’ll try to have it talk to either the sensor or the light ring.
I just managed to solder together the NeoPixel ring. Due to the size of the electrical pads on the ends of these, I’d suggest that this falls into the catagory of advanced soldering and not to be taken on by the average person.
Additionally, I’d say that this feels a bit fragile in the area of the soldering joints between each quarter-circle. I’m going to suggest that anyone who incorporates one of these into their project needs to seriously think about ways of making this more stable/reliable since the soldering joints between them are tenuously-small. (Imagine three distinct electrical connections across the tiny width of this thing.)
What I also found is that there isn’t anywhere to clamp a hemostat for soldering these jumpers since the LEDs run all the way to the end where the connections should go.
I did add an inline resistor as Adafruit suggested to lower the input voltage or perhaps to lower start-up voltage spikes.
I managed to re-purpose a nice external 5V switching power supply that should drive all the LEDs nicely. It was left over from the supercomputer project when I swapped in a USB-based charger instead for that. Amazingly, Adafruit suggests that those 60 LEDs need a whopping 3.6A of power to drive them. I’m guessing that reality is more like 1A but I’ll play this safe. Per Adafruit’s suggestion I included a 1000 µF electrolytic capacitor across the output voltage to protect the NeoPixels.
So I’m prepped to do a final test of the NeoPixel ring for power and functionality on a standard Raspberry Pi 3 rig (since it sports an actual header). Once I’ve coded a test and verified that it works then I’ll take the soldering iron to the Raspberry Pi Zero W and wire it in with a quick-connect.
I’ve now got the Raspberry Pi Zero W booting with just the power adapter. Note that you can rename its hostname, toggle on the VNC Server, adjust the default screen resolution to your liking and then—in the Finder program in OS X—open up a remote session to its Desktop with
vnc://email@example.com, for example. Or, toggle on the SSH Server and connect from a Terminal session with
Have I mentioned how awesome it is to have a fully-functioning computer for $10 (plus $6 for the micro SD)?
And now the power supply is completed and wired to the NeoPixel ring. Everything’s set for 5V DC in at the moment but I may try to adjust the input voltage down to 3.3V later for technical reasons. (The NeoPixels are designed for the Arduino and its output data voltage is 5V whereas the Raspberry Pi is only 3.3V. By adjusting the input voltage down then it makes a 3.3V data line look bigger than it is. There are other tricks like adding a 3V-to-5V data inverter chip but I’d like to avoid that one if possible.)
I’ve smoke-tested the power supply/ring combination and it’s looking good. To make things easier for this step, I’ve now setup a surrogate Raspberry Pi 3 for testing things but since I only had a leftover 4GB microSD, I was forced to use the no-desktop “Lite” Jessie version of Raspbian. But that’s now ready and I’ll likely have some time this weekend to do a basic blink test.